Sunkun Technology Service hotline
(+86)0755-28995058
(+86)0755-28995058
What are the UV glue is analysed using common problem
1, how to remove the glue?
Soft cloth, paper towel and gently wipe glue, can dip in acetone alcohol to wipe, after positioning is relatively easy to remove, knife in addition to completely cured.
2, why glue or fixed with glue surface sticky, don't do it?
Surface drying problem is the weakness of uv-curable adhesives, is caused by oxygen polymerization. Can use the high-power light fast curing, or curing under nitrogen protection.
3,How long does it take to UV adhesive cured completely?
According to the specific UV glue and customers to use curing light is different, cannot treat as the same, the need to experiment to determine. Uv light intensity is high, the irradiation time is short, can be cured, and vice versa.
4, plastic UV glue curing what note is there?
During the curing reaction of many plastic heat temperature is low, need to pay attention to heat dissipation, multiple exposure, to prevent the high temperature plastic deformation; Uv transmittance in some plastic is low, such as PVC light transmittance is only 25-30%, PC contains a lot of ultraviolet absorbent, these materials during curing, must pay attention to can use T8 / T9 uv lamp and HPL high-voltage fluorescent bulbs illuminate for a long time, and so on.
5, our UV glue, can be cured in visible light?
Can, but slower, and need the strong sunlight.
6, how to use the UV adhesive separation or objects? How to remove after curing UV shadowless glue?
Bonding bad need to separate or remove glue to glue again, according to the specific adhesive and glued, you can use the method have a hair dryer to heat, water, steam smoked, acetone or ethanol soak, or water soak for a long time.
7, why bonding glass metal UV glue are prone to fall off during the summer?
Summer is the UV shadowless glue is the season of the accident. Summer rain or wet weather, the glass surface is very easy to absorb moisture, and many customers only with cloth is wiped can not remove water film, cause the intensity attenuation until fall off. Can use hair dryer dry glass to maintain long-term bonding.
8, why winter feeling some of the adhesive bonding strength down?
UV glue in the winter when the temperature drops, the film can harden brittle, led to the decrease of the intensity of feeling. The winter low temperature region need to adjust the adhesive formula, make it has better toughness at low temperature.
9, why some manufacturers of UV glue can often to break the glass?
Glue after curing increase hardness, strength after reaction quickly passed into the glass, glass damage, and in practical use due to the strong glue, can cushion the impact, short service life. Toughening agent is added in the UV glue, can effectively buffer stress, bonding effect is better, more long.