Sunkun Technology Service hotline
(+86)0755-28995058
(+86)0755-28995058
Look from the industrial applications of uv light solid machine development prospects
1. In electronic, optical, LCD, screen printing, packaging, and many other fields is widely used. Such as:
Silk screen printing and packing carton picture in the offset printing, nameplate, desk calendar, such as UV ink curing, UV curing all kinds of CARDS, calendars nameplate, large pieces of cardboard UV light oil and dry curing equipment;
2. Small plastic electronic hardware UV glue or UV curing ink, electronics, precision parts, magnetic head, magnetic materials optical, liquid crystal display, micro-motor, UV light solid glue dispensing curing, LCD glass sealing side of UV glue curing equipment;
3. Double-sided board face or double printing surface UV curing equipment, (printed circuit board, etc.);
4. Striped print UV curing equipment (trademark printing machine or other type line) connection, for UV curing, the efficiency multiplier;
Five. Plastic buttons, metal buttons, plastic PE plastic shell UV oil, UV glue dry curing, ceramic capacitor production line, small electronic components marking curing dedicated equipment;
Sankun to uv light solid machine broad prospects for development, but also emphasizes the efficiency of uv light solid machine, uv light solid machine's operation efficiency is mainly manifested in the following aspects:
1. In starting the door plank of UV light solid machine to the power cord plugged into a power supply correctly.
2. The power supply after start-up such as long time don't turn on the light, the device will automatically cut off the switchboard power supply.
3. Close the total button switch, power indicator light is lit, press the power button, the machine is in standby mode.
4. Start the uv lamp, immediately after turn off the lights don't light is a normal phenomenon, after uv lamp cooling can light up.
5. Close the motor switch, mesh belt running, according to the product requirements to adjust speed control knob, please make the mesh belt speed is appropriate.
6. Start A lamp, A lamp current down to A steady state after the restart lamp of B or C lamp. In order to prevent the power switch over current.
7. Close the uv lamp, according to the stop button after A stop light, B lamp fan continuous operation, to heat, ultraviolet lamp tubes after cooling, automatic cut off the switchboard power supply.
8. Changing a uv lamp, open the box, loose box screw securing the power cord, pull a light box for conversion.