The UV curing machine maintenance and use
Time:2016-04-15 10:12Source:sankunClick: Number
All the machines when not using, if for maintenance and maintenance, can prolong the life of the machine, how to maintain the uv curing machine?
First, ultraviolet rays can damage the eyes and skin, turn on the light not only cannot use his eyes to look straight tube surface, and don't let the ultraviolet light skin.
Second, transformer, capacitor
(1) the working voltage of the transformer into the line according to choose the right terminal.
(2) the capacitor after use, when maintenance must discharge, or capacitor will discharge cuts.
Third, uv lamp maintenance
(1) the service life of the UV lamp is one of the biggest general is 800-1000 hours, after reaching life should be replaced immediately.
(2) the UV lamp use period, at the right time (1-2 months) with anhydrous ethanol, gauze first clean tube surface and reflection on the surface of the reflector plate, then rotate the UV lamp 180 oc. Chimney baffle board must be replaced after losing mirror effect.
Fourth, speed regulation
(1) the choice of optimum speed method: first the product through UV curing device at a certain speed, once solidified, then speed up, until by curing device products just can not completely cured, this time is to speed multiplied by 0.8 to get the best value is speed.
(2) also, pay attention to the use time of uv light curing machine, with uv lamp using the extension of time, the energy attenuation, will slowly speed will also go down
TAG:
LEDUV(31)UVLED(33)
